The 15th China Int'l Woodworking Machinery (Dalian) Exhibition closed with success on June 13

Sponsored by China National Furniture Association, Dalian Municipal Government, organized by Dalian Small and Medium-Sized Enterprises Bureau, Dalian Furniture Association and Dalian Northern Int'l Exhibition Company, the 15th China Int'l Woodworking Machinery (Dalian) Exhibition (China Woodwork 2010) closed with success at Dalian Star-Sea Convention & Exhibition Center on June 13.

China Woodwork 2010 covered a total show area of 10,000 sqm. 120 domestic and overseas exhibitors displayed several hundred units of the latest woodworking equipment with related high-tech products, tools and technology. It gave an all-over view of the development trends of the Chinese woodworking machinery industry and related features of supporting products.

During the four-day show period, the fair welcomed over 14.7 thousand trade visitors of furniture manufacture, wood processing, interior design, trade associations and organizations, including 2300 international visitors.

Economic recovery shows a bright future.

In 2010, the global economy is taking on a recovery status. Demand of domestic and overseas furniture has been rebounding strongly, and closely related industry, especially the woodworking machinery, face more developing opportunities. As the largest-scale trade fair with the highest quality in North China, China Woodwork 2010 kept up with the situation and built a valuable exchange platform. At this fair not only gathered suppliers from Australia, Austria, Canada, Germany, France, Sweden and U.S.A., but also key players in China including Ma's, V-Hold, Weideli, Qianchuan, Qiqing Commercial Land, JCH, New Motivity. Various exhibits included woodworking machinery, machines for uphostery & bedding, cutting tools, supporting equipment, etc. Due to the efforts of the organizer, buyers from overseas as well as domestic regions like the three Northeastern provinces of Beijing, Tianjin and Shandong visited the fair. The negotiation scene onsite was lively.

Low carbon and emission reduction leads renovation. Decreasing of Manpower and increasing efficiency make manufacturer's more professional.

Low carbon and environmental protection has become a trend. Keeping up with the situation, the woodworking machinery industry continues to renovate and focus on energy conservation and emission reduction. Simultaneously, the development of the industry further demands the equipment to reduce manpower and increase efficiency. Exhibitors remarked that the industry tend is towards specialization, high technology, security and branding. The research and development of new equipment tends towards humanism, on the base of security guarantee, reducing energy, manpower and pollution, cutting down production cost and promoting efficiency.

The high frequency rigid frame assembly machine, the latest equipment launched by Shijiazhuang Cangao High Frequency Machinery Co., Ltd. is applied in assembly of cabinet doors, drawers, picture frames, mirror frames and furniture frames. Only 0.003-0.004 kwh electricity is needed to assemble one frame, and 2-20 seconds is taken to solid glue, which saves manpower and reduce resources consumption dramatically.
The profile sander developed by Guangdong Pater Machinery Factory is calibrated to different types of copy and surface sanding on various materials. The feed speed is mechanically adjustable, and max speed is 42 m/min. With automatic compensation, it reduces consumption of hand adjustment, cuts cost and increases efficiency as well as saves energy and lessens emission.

The fully-automatic numerical controlled paint spraying machine of Guangdong Houji Numerical Controlled Equipment Co., Ltd. is featured with high spraying speed and easy operation, saving 10%-15% paint compared to manpower operation, evenly spraying with no color difference and blind zone. Especially the application of a spray-paint clean room not only avoids harm to health of the worker from operation, but also realizes three reductions, -- manpower reduction, pollution reduction and raw material reduction. The products are well received in domestic market, and even exported to Middle Eastern regions and Malaysia. Huan Hung Industrial Co., Ltd. developed auto shaping and copying machines which save energy, electricity and materials, and the protective casing ensures safety of the operator. At the fair, Chenyuan Wood Industrial Company, the company's routine customer, gave another order on site.

Outstanding Location Advantages Helped the Fair.

Based in Dalian, China Woodwork covers the Northeastern market and focuses on the Bohai Rim. This edition gained exhibitors' favorable reception. The exhibitors indicated that Dalian is a famous wood furniture industrial base, and not only is the wood processing industry concentrated here, but there is also a positive targeted market with a large group of potential customers focusing on trade. At the same time, Dalian has more joint ventures which demand high labor reductions, efficiency promotion and cuts in resource consumption, which accords with the requirement of current times and industrial development. Relying on firm market backup and customers' accumulation, China Woodwork gives full scope to the advantages of this location.

Backed up by China's Solid Wood Furniture Industrial Base, after 15 years of cultivation, China Woodwork has become an efficient channel for Chinese companies to expand overseas markets and foreign exhibitors to promote sales in China. The event will contribute to the development of the Chinese furniture industry as it always does.