Multi-sheet Slicer

Multi-sheet Slicer


Classification:Veneer slicers
Main features:
1) This machines is equipped with a device of ''double spindle'' for setting multiple circular saw-blades which can horizontally cut wooden boards and through the ''thickness guide way'', the cut-board will be out-feed smoothly in order to ensure the accuracy of cutting.
2) The feed roller is driven by pneumatic pressure and meanwhile is cooperated with a gear speed reducer to increase the feeding capacity.
3) The machine is equipped with 4 upper feeding rollers, one bottom main driving roller as well as with one auxiliary roller of the right cutting spindle in order to reinforce the feeding capability. The auxiliary feed roller can be lifted for easily replacing new cutters or adjustment.
4) The feed roller is driven by electro-elevating for easy and time-saving adjustment.
5) The working table is made by alloyed steel and cast-iron. After vacuum heating-treated and precise ground, it is re-treated again with hard chrome plating to reinforce its precision and life span.
6) Spindles of saw blades are equipped with ''over-loading protection'' device. When over-loading, the feed motor will be first stopped and then 2 saw blade motors will be stopped, too.

Fulpow Industrial Corp.

  • President: Kathy Huang
  • General :
  • Exporter : Siggi Lin
  • Address : 7F-2, No. 400, Sec. 1, Chang Ping Road, Taichung, Taiwan (40652)
  • TEL : 886-4-22439235
  • FAX : 886-4-22443829
  • Website
  • E-mail :
  • Main Products

    • 4-Side Moulders
    • 2-Side Planers
    • Auto Planers
    • Straight Line / Multiple Rip Saws
    • Spindle Shapers
    • Wide Belt Sanders
    • Finger Shaping and Assembling Machines/Lines
    • Optimizing Cut Off Saws
    • Panel Saws
    • End Matching Machines
    • Frame Saws
    • Hyd. Vertical Band Resaws
    • Cut Off Saws